Eemshaven wind farm is situated in Groningen, The Netherlands. It was in fact brought online in 2008 and is owned by .
It is near Eemshaven.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best destination for something like Eemshaven would be a steady availability of non-turbulent wind. An important factor of turbine siting is furthermore access to local demand or transmission capaEemshaven.
During the planning stages the Eemshaven wind farm would’ve been checked and endorsed through wind measurements. However, Eemshaven wind farm might have needed more than simply meteorological data and measurements.
Collection of site-specific data for wind speed and direction might have been imperative to determining site potential to be able to fund the project. Local winds are frequently monitored for a year or more, and comprehensive wind maps built before wind generators are set up.
Altitude would also have a part to performin a project like Eemshaven. This is due to drag The boost in velocity with altitude is most dramatic near the surface and is impacted by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity increases with altitude and is more pronounced near land and is transformed by terrain, surface and hurdles.
Wind speeds escalating with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the height of a turbine, then, enhances the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing increases placement, particularly in hilly areas.
Individual turbines at Eemshaven are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is enhanced in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly roads to each turbine site.
Facts about Eemshaven wind farm
- Name: Eemshaven
- Wind turbine Supplier: Clipper Windpower, Model: 2.5MW, Units: 8,
- Country: The Netherlands
- Developer: Koop Duurzame Energie (KDE Energy), Essent
- State: Groningen
- City: Eemshaven