De Horn wind farm is located in Limburg, The Netherlands. It was created in 2005 and is owned by .
It is near Horn.
See below for data.
As a general rule, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or larger.
The very best location for something similar to De Horn is a steady supply of non-turbulent wind. An essential aspect of turbine siting is moreover access to local requirement or transmission capaHorn.
During the planning stages the De Horn wind farm would’ve been checked and authenticated through wind measurements. Meteorological wind data alone is usually not adequate for exact siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been vital to determining site potential in order to finance the project. Winds around Horn are evaluated for over a year or so alongside the development of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playin a project like De Horn. This is because of drag The boost in velocity with altitude is most spectacular close to the surface and is affected by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity rises with altitude and is more obvious near land and is transformed by geography, surface and limitations.
Wind speeds growing with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, boosts the predicted wind speeds by 10%, and the predicted power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing optimizes placement, particularly in hilly areas.
De Horn turbines are related via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and probably access roads to each and every turbine site.