Beabuorren wind farm is located in Friesland, The Netherlands. It was finished in 2009 and is owned by .
It is near Wûnseradiel.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
A perfect place for a project like Beabuorren might have a near constant flow of non-turbulent wind year round, with a minimum chances of sudden potent bursts of wind. Additionally, you would not get a turbine like included if Beabuorren was not built near local demand or transmission capaWûnseradiel.
Before development, Beabuorren was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. However, Beabuorren wind farm might have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction might have been essential to determining site potential as a way to fund the project. Winds around Wûnseradiel are examined for over a year or so plus the creation of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to performwithin a project like Beabuorren. This is due to drag The increase in velocity with altitude is most extraordinary near the surface and is affected by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and is more obvious near land and is transformed by geography, surface and obstacles.
Wind speeds escalating with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, raises the expected wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so that they don’t affect one another. But this is not always the way it is in hilly areas.
Individual turbines at Beabuorren are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is increased in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and probably access roads to each turbine site.