Bränneberg wind project was installed in Västra Götaland County, Sweden It was brought online in 2002 and is owned by .
It is near Bränneberg.
See below for data.
Typically, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or greater.
An ideal location for a project like Bränneberg would have a near constant flow of non-turbulent wind all year long, having a minimum probability of abrupt powerful bursts of wind. Additionally, you wouldn’t get a turbine like associated if Bränneberg was not built near local demand or transmission capaBränneberg.
During the planning stages the Bränneberg wind farm would have been checked and endorsed through wind measurements. Meteorological wind data alone is usually not sufficient for correct siting of a large wind power project.
Assortment of site-specific data for wind speed and direction might have been important to determining site potential as a way to fund the project. Winds around Bränneberg are analysed for at least a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like Bränneberg. This is because of drag The increase in velocity with altitude is most dramatic near the surface and is affected by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and is also more distinct near land and is changed by geography, surface and obstructions.
Normally, the growth of wind speeds with escalating height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, enhances the expected wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect each other. However this is not always the situation in hilly areas.
Individual turbines at Bränneberg are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is elevated in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and probably roads to each turbine site.
Facts about Bränneberg wind farm
- Name: Bränneberg
- Wind turbine Supplier: Furhlander, Model: FL MD/77, Units: 6,
- Country: Sweden
- Developer: Vestas Wind Systems
- State: Västra Götaland County
- City: Bränneberg