Bondön wind farm is situated in Norrbotten County, Sweden. It was completed in 2008 and is owned by .
It is near piteå.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
The best position for a project like Bondön might have a near constant flow of non-turbulent wind throughout the year, having a minimum likelihood of sudden powerful bursts of wind. Additionally, you wouldn’t get a turbine like involved if Bondön was not built near local demand or transmission capapiteå.
During the planning stages the Bondön wind farm would have been checked and endorsed through wind measurements. However, Bondön wind farm might have needed more than merely meteorological data and measurements.
Assortment of site-specific data for wind speed and direction might have been vital to determining site potential as a way to finance the project. Local winds are often supervised for a year or more, and detailed wind maps made before wind generators are installed.
Altitude would also have a part to performwithin a project like Bondön. This is because of drag The rise in velocity with altitude is most dramatic close to the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and is more evident near land and is transformed by terrain, surface and limitations.
Generally, the rise of wind speeds with escalating height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, increases the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But micrositing maximizes placement, specifically in hilly areas.
Individual turbines at Bondön are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is increased in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and possibly roads to each turbine site.
Facts about Bondön wind farm
- Name: Bondön
- Wind turbine Supplier: Enercon, Model: E66/1800, Units: 5,
- Country: Sweden
- State: Norrbotten County
- City: piteå