Blåshult 6 wind project was installed in Skåne County, Sweden It was in fact brought online in 2011 and is owned by .
It is near Blåshult.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best destination for something such as Blåshult 6 is a steady availability of non-turbulent wind. An essential aspect of turbine siting is moreover admission to local demand or transmission capaBlåshult.
Before development, Blåshult 6 was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not sufficient for exact siting of a large wind power project.
Assortment of site-specific data for wind speed and direction might have been crucial to determining site potential to be able to fund the project. Winds around Blåshult are analysed for over a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
The wind blows more rapidly at greater altitudes as a result of reduced effect of drag. The increase in velocity with altitude is most remarkable near the surface and is impacted by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and is more pronounced near land and is altered by terrain, surface and obstructions.
Normally, the growth of wind speeds with escalating height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, enhances the expected wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect one another. But micrositing increases placement, particularly in hilly areas.
Blåshult 6 turbines are related via medium voltage lines and communications.
At a substation, this particular medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to every turbine site.
Facts about Blåshult 6 wind farm
- Name: Blåshult 6
- Wind turbine Supplier: Senvion, Model: MM92/ 2.05MW, Units: 3,
- Country: Sweden
- Developer: Enercon
- State: Skåne County
- City: Blåshult