Badane 2-3 wind project was set up in Västra Götaland County, Sweden It was finished in 2003 and is owned by .
It is near Kättilstorp.
See below for data.
Typically, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or higher.
A great place for a project like Badane 2-3 could have a near constant flow of non-turbulent wind year round, with a minimum likelihood of sudden potent bursts of wind. Additionally, you wouldn’t get a turbine like included if Badane 2-3 was not built near local demand or transmission capaKättilstorp.
Before building, Badane 2-3 was probably screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for accurate siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been vital to determining site potential to be able to fund the project. Local winds are often examined for a year or more, and comprehensive wind maps constructed before wind generators are installed.
Altitude would also possess a part to playwithin a project like Badane 2-3. This is due to drag The rise in velocity with altitude is most extraordinary close to the surface and is affected by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is more evident near land and is changed by geography, surface and limitations.
Wind speeds escalating with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, enhances the expected wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect one another. But micrositing maximizes placement, specially in hilly areas.
Individual turbines at Badane 2-3 are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is enhanced in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and probably access roads to each and every turbine site.
Facts about Badane 2-3 wind farm
- Name: Badane 2-3
- Wind turbine Supplier: Suzlon Energy, Model: 1MW, Units: 1,
- Country: Sweden
- Developer: Neg Micon
- State: Västra Götaland County
- City: Kättilstorp