Axeltofta wind project was set up in Skåne County, Sweden It was brought online in 2008 and is owned by .
It is near Axeltofta.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
The best location for something similar to Axeltofta would be a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine like associated if Axeltofta was not built near local demand or transmission capaAxeltofta.
Before building, Axeltofta was probably screened on the basis of a wind atlas, and validated with wind specifications. However, Axeltofta wind farm would have needed more than simply meteorological data and measurements.
Site data around Axeltofta would have been a major element in the development conclusion Winds around Axeltofta are evaluated for at least a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like Axeltofta. This is because of drag The rise in velocity with altitude is most remarkable close to the surface and is impacted by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is also more pronounced near land and is altered by geography, surface and obstacles.
Wind speeds escalating with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, increases the expected wind speeds by 10%, and the expected power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. However this isn’t necessarily the situation in hilly areas.
Individual turbines at Axeltofta are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is improved in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and perhaps access roads to each and every turbine site.