Askome wind farm is located in Halland County, Sweden. It was brought online in 2014 and is owned by .
It is near 3 km northeast of the Vessigebro in Falkenberg Municipality.
See below for data.
As a rule, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or greater.
A perfect place for a project like Askome might have a near constant flow of non-turbulent wind all year long, having a minimum chance of abrupt powerful bursts of wind. Additionally, you wouldn’t get a turbine like associated if Askome was not built near local demand or transmission capa3 km northeast of the Vessigebro in Falkenberg Municipality.
Before development, Askome was almost certainly screened on the foundation of a wind atlas, and validated with wind measurements. However, Askome wind farm might have needed more than merely meteorological data and measurements.
Site data around 3 km northeast of the Vessigebro in Falkenberg Municipality would have been a major aspect in the ‘development’ decision Local winds are frequently monitored for a year or more, and detailed wind maps made before wind generators are set up.
Altitude would also have a part to playwithin a project like Askome. This is due to drag The increase in velocity with altitude is most extraordinary close to the surface and is impacted by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and is also more obvious near land and is transformed by geography, surface and limitations.
Normally, the increase of wind speeds with escalating height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, raises the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. However this might not be the case in hilly areas.
Individual turbines at Askome are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is increased in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and probably access roads to every turbine site.
Facts about Askome wind farm
- Name: Askome
- Wind turbine Supplier: GE Wind Energy, Model: 2.75MW, Units: 10,
- Country: Sweden
- Developer: Havgul Nordic
- State: Halland County
- City: 3 km northeast of the Vessigebro in Falkenberg Municipality