Couto de San Sebastian wind farm is located in Pontevedra, Spain. It was brought online in 2007 and is owned by Energias Renovables Montes de San Sebastian.
It is near Silleda y A Estrada.
See below for data.
As a general rule, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or greater.
An ideal location for a project like Couto de San Sebastian might have a near constant flow of non-turbulent wind throughout the year, with a minimum chances of sudden effective bursts of wind. An important factor of turbine siting is also access to local demand or transmission capaSilleda y A Estrada.
During the planning stages the Couto de San Sebastian wind farm would have been checked and authenticated through wind measurements. Meteorological wind data alone is usually not ample for precise siting of a large wind power project.
Site information around Silleda y A Estrada is a major element in the ‘development’ conclusion Local winds are frequently supervised for a year or more, and detailed wind maps made before wind generators are installed.
The wind blows swifter at greater altitudes because of the reduced influence of drag. The increase in velocity with altitude is most remarkable at the surface and is impacted by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity increases with altitude and is also more evident near land and is transformed by landscape, surface and obstacles.
Generally, the rise of wind speeds with raising elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, enhances the expected wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing increases placement, specifically in hilly areas.
Individual turbines at Couto de San Sebastian are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is elevated in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to every turbine site.
Facts about Couto de San Sebastian wind farm
- Name: Couto de San Sebastian
- Wind turbine Supplier: Nordex, Model: N100 2500, Units: 4,
- Country: Spain
- Developer: Energias Renovables Montes de San Sebastian
- State: Pontevedra
- City: Silleda y A Estrada
- Owner: Energias Renovables Montes de San Sebastian