Coto de Codesas II wind project was installed in La Coruña, Spain It was created in 2009 and is owned by Enel Union Fenosa Renovables (EUFER).
It is near Sobrado y Boimorto.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
The best place for a project like Coto de Codesas II might have a near constant flow of non-turbulent wind all year round, having a minimum likelihood of abrupt potent bursts of wind. Additionally, you would not get a turbine Enel Union Fenosa Renovables (EUFER) like Enel Union Fenosa Renovables (EUFER) included if Coto de Codesas II was not built near local demand or transmission capaSobrado y Boimorto.
Before development, Coto de Codesas II was most likely screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not enough for exact siting of a large wind power project.
Site info around Sobrado y Boimorto is a major aspect in the development decision Local winds are frequently supervised for a year or more, and comprehensive wind maps constructed before wind generators are set up.
Altitude would also possess a part to playwithin a project like Coto de Codesas II. This is due to drag The surge in velocity with altitude is most extraordinary near the surface and is impacted by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is more obvious near land and is changed by topography, surface and limitations.
Wind speeds raising with altitude is part of a wind energy law. This La Coruñas wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, increases the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they don’t affect one another. However this might not be the case in hilly areas.
Individual turbines at Coto de Codesas II are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is improved in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to each and every turbine site.
Facts about Coto de Codesas II wind farm
- Name: Coto de Codesas II
- Wind turbine Supplier: Siemens, Model: SWT101-2.3MW, Units: 9,
- Country: Spain
- Developer: Enel Union Fenosa Renovables (EUFER)
- State: La Coruña
- City: Sobrado y Boimorto
- Owner: Enel Union Fenosa Renovables (EUFER)