Corme wind farm is located in La Coruña, Spain. It was in fact brought online in 2000 and is owned by Desarrollos Eolicos Corme.
It is near Ponteceso.
See below for data.
For the most part, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or greater.
The best destination for something such as Corme is a steady supply of non-turbulent wind. An essential aspect of turbine siting is furthermore admission to local demand or transmission capaPonteceso.
Before development, Corme was probably screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not enough for correct siting of a large wind power project.
Site information around Ponteceso is a major element in the development decision Winds around Ponteceso are examined for at least a year or so plus the creation of detailed maps. Only then are wind turbines installed.
The wind hits quicker at greater altitudes because of the reduced influence of drag. The rise in velocity with altitude is most dramatic at the surface and is affected by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and is more pronounced near land and is altered by terrain, surface and hurdles.
Usually, the rise of wind speeds with growing height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, boosts the predicted wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so that they don’t affect each other. However this isn’t necessarily the way it is in hilly areas.
Individual turbines at Corme are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric energy is enhanced in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to every turbine site.
Facts about Corme wind farm
- Name: Corme
- Wind turbine Supplier: Gamesa, Model: G52_850kW, Units: 5,
- Country: Spain
- Developer: Desarrollos Eolicos Corme
- State: La Coruña
- City: Ponteceso
- Owner: Desarrollos Eolicos Corme