Collet deis Feixos wind project was set up in Tarragona, Spain It was finished in 2004 and is owned by .
It is near Duesaigües.
See below for data.
For the most part, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or larger.
The very best destination for something similar to Collet deis Feixos would be a steady supply of non-turbulent wind. Additionally, you would not get a turbine like involved if Collet deis Feixos was not built near local demand or transmission capaDuesaigües.
During the planning stages the Collet deis Feixos wind farm would have been checked and endorsed through wind measurements. Meteorological wind data alone is usually not adequate for correct siting of a large wind power project.
Site data around Duesaigües would have been a major factor in the ‘development’ decision Local winds are frequently watched for a year or more, and detailed wind maps created before wind generators are installed.
The wind blows sooner at higher altitudes because of the reduced influence of drag. The rise in velocity with altitude is most dramatic near the surface and is impacted by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and it is more distinct near land and is changed by geography, surface and obstacles.
Wind speeds growing with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, raises the predicted wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect one another. However this may not be the case in hilly areas.
Individual turbines at Collet deis Feixos are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is enhanced in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably roads to each turbine site.