Cerro de la Nevera wind farm is situated in Valencia, Spain. It was in fact brought online in and is owned by Andilla.
It is near La Yesa.
See below for data.
For the most part, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or greater.
A perfect location for a project like Cerro de la Nevera might have a near constant flow of non-turbulent wind throughout the year, having a minimum chance of sudden effective bursts of wind. Additionally, you would not get a turbine Andilla like Andilla associated if Cerro de la Nevera was not built near local demand or transmission capaLa Yesa.
Before building, Cerro de la Nevera was almost certainly screened on the foundation of a wind atlas, and validated with wind measurements. However, Cerro de la Nevera wind farm would have needed more than just meteorological data and measurements.
Site data around La Yesa would have been a major factor in the development final decision Local winds are frequently examined for a year or more, and detailed wind maps built before wind generators are set up.
The wind hits quicker at greater altitudes due to the reduced effect of drag. The boost in velocity with altitude is most dramatic near the surface and is impacted by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and is also more distinct near land and is altered by terrain, surface and obstructions.
Wind speeds growing with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, raises the predicted wind speeds by 10%, and the expected power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing optimizes placement, particularly in hilly areas.
Individual turbines at Cerro de la Nevera are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is increased in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and probably roads to every turbine site.
Facts about Cerro de la Nevera wind farm
- Name: Cerro de la Nevera
- Wind turbine Supplier: IMPSA, Model: IWP100-2.0MW, Units: 6,
- Country: Spain
- Developer: Onshore
- State: Valencia
- City: La Yesa
- Owner: Andilla