Brulles wind farm is situated in Burgos, Spain. It was completed in 2012 and is owned by Inversiones Empresariales Vapat.
It is near Villadiego.
See below for data.
For the most part, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or greater.
The best position for a project like Brulles could have a near constant flow of non-turbulent wind throughout the year, having a minimum likelihood of sudden potent bursts of wind. Additionally, you would not get a turbine Inversiones Empresariales Vapat like Inversiones Empresariales Vapat included if Brulles was not built near local demand or transmission capaVilladiego.
Before development, Brulles was most likely screened on the foundation of a wind atlas, and validated with wind measurements. However, Brulles wind farm would have needed more than just meteorological data and measurements.
Site info around Villadiego is a major aspect in the ‘development’ decision Winds around Villadiego are analysed for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
The wind blows swifter at greater altitudes due to the reduced influence of drag. The rise in velocity with altitude is most spectacular close to the surface and is impacted by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and it is more pronounced near land and is changed by landscape, surface and hurdles.
Wind speeds growing with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the height of a turbine, then, enhances the expected wind speeds by 10%, and the predicted power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But micrositing maximizes placement, particularly in hilly areas.
Brulles turbines are connected via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is enhanced in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and possibly access roads to every turbine site.