Borja II wind farm is located in Zaragoza, Spain. It was created in 2001 and is owned by EDP Renovaveis.
It is near Borja.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The very best location for something like Borja II would be a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine EDP Renovaveis like EDP Renovaveis included if Borja II was not built near local demand or transmission capaBorja.
Before development, Borja II was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not sufficient for accurate siting of a large wind power project.
Site data around Borja would have been a major factor in the ‘development’ decision Winds around Borja are examined for at least a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like Borja II. This is due to drag The boost in velocity with altitude is most extraordinary at the surface and is affected by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and is also more obvious near land and is altered by terrain, surface and obstacles.
Wind speeds increasing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the height of a turbine, then, raises the predicted wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect each other. But micrositing increases placement, particularly in hilly areas.
Individual turbines at Borja II are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is elevated in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly access roads to each and every turbine site.
Facts about Borja II wind farm
- Name: Borja II
- Wind turbine Supplier: Vestas Wind Systems, Model: V44/600 , Units: 4,
- Country: Spain
- Developer: CEASA
- State: Zaragoza
- City: Borja
- Owner: EDP Renovaveis