Barbers wind farm is situated in Tarragona, Spain. It was finished in 2012 and is owned by Eolia Renovables.
It is near Ascó Ribera d’Ebre.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best position for a project like Barbers would have a near constant flow of non-turbulent wind throughout the year, with a minimum probability of abrupt effective bursts of wind. Additionally, you would not get a turbine Eolia Renovables like Eolia Renovables associated if Barbers was not built near local demand or transmission capaAscó Ribera d’Ebre.
Before development, Barbers was almost certainly screened on the foundation of a wind atlas, and validated with wind measurements. However, Barbers wind farm would have needed more than just meteorological data and measurements.
Site information around Ascó Ribera d’Ebre is a major factor in the development conclusion Local winds are frequently supervised for a year or more, and comprehensive wind maps constructed before wind generators are set up.
The wind hits sooner at higher altitudes as a result of reduced influence of drag. The rise in velocity with altitude is most dramatic at the surface and is affected by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and it is more evident near land and is transformed by topography, surface and obstacles.
Wind speeds increasing with altitude is part of a wind energy law. This Tarragonas wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, increases the expected wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect each other. But micrositing optimizes placement, particularly in hilly areas.
Barbers turbines are connected via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is elevated in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and probably roads to each and every turbine site.
Facts about Barbers wind farm
- Name: Barbers
- Wind turbine Supplier: Made Tecnolgías, Model: AE-30, Units: 60,
- Country: Spain
- Developer: Eolia Renovables, Enerfin
- State: Tarragona
- City: Ascó Ribera d’Ebre
- Owner: Eolia Renovables