Ameixenda – Filgueira wind project was installed in La Coruña, Spain It was in fact brought online in 2002 and is owned by Acciona.
It is near Dumbria y Cee.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
A perfect location for a project like Ameixenda – Filgueira could have a near constant flow of non-turbulent wind throughout the year, having a minimum chances of sudden powerful bursts of wind. Additionally, you would not get a turbine Acciona like Acciona involved if Ameixenda – Filgueira was not built near local demand or transmission capaDumbria y Cee.
Before building, Ameixenda – Filgueira was most likely screened on the foundation of a wind atlas, and validated with wind specifications. However, Ameixenda – Filgueira wind farm might have needed more than merely meteorological data and measurements.
Site info around Dumbria y Cee is a major aspect in the development conclusion Local winds are frequently supervised for a year or more, and detailed wind maps built before wind generators are installed.
Altitude would also possess a part to performin a project like Ameixenda – Filgueira. This is due to drag The boost in velocity with altitude is most remarkable near the surface and is affected by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and it is more distinct near land and is changed by topography, surface and obstacles.
Typically, the rise of wind speeds with raising height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, boosts the predicted wind speeds by 10%, and the predicted power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But micrositing maximizes placement, specially in hilly areas.
Ameixenda – Filgueira turbines are linked via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is elevated in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Ameixenda – Filgueira wind farm
- Name: Ameixenda – Filgueira
- Wind turbine Supplier: Siemens, Model: Izar Bonus MK-IV, Units: 58,
- Country: Spain
- Developer: Acciona
- State: La Coruña
- City: Dumbria y Cee
- Owner: Acciona