Alta Anoia wind project was installed in Tarragona, Spain It was brought online in 2010 and is owned by .
It is near Pujalt, Veciana, Prats de Rei and Calonge de Segarra.
See below for data.
Typically, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or more.
The very best location for something like Alta Anoia would be a steady supply of non-turbulent wind. Additionally, you would not get a turbine like included if Alta Anoia was not built near local demand or transmission capaPujalt, Veciana, Prats de Rei and Calonge de Segarra.
During the planning stages the Alta Anoia wind farm would have been checked and validated through wind measurements. However, Alta Anoia wind farm would have needed more than merely meteorological data and measurements.
Collection of site-specific data for wind speed and direction could have been important to determining site potential in order to fund the project. Winds around Pujalt, Veciana, Prats de Rei and Calonge de Segarra are analysed for at least a year or so alongside the development of detailed maps. Only then are wind turbines installed.
The wind hits more rapidly at greater altitudes because of the reduced effect of drag. The boost in velocity with altitude is most extraordinary close to the surface and is affected by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity grows with altitude and it is more pronounced near land and is transformed by terrain, surface and obstructions.
Generally, the rise of wind speeds with increasing elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, raises the predicted wind speeds by 10%, and the anticipated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing optimizes placement, particularly in hilly areas.
Individual turbines at Alta Anoia are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is enhanced in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and probably roads to every turbine site.
Facts about Alta Anoia wind farm
- Name: Alta Anoia
- Wind turbine Supplier: Vestas Wind Systems, Model: V90-2.0MW, Units: 9,
- Country: Spain
- Developer: Civis Corporación
- State: Tarragona
- City: Pujalt, Veciana, Prats de Rei and Calonge de Segarra