A Capelada II wind farm is situated in Coruña, Spain. It was finished in 1997 and is owned by P.Eolico A Capelada A.I.E..
It is near Carino,Cedeira,Ortigueira.
See below for data.
As a rule, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or larger.
A great location for a project like A Capelada II might have a near constant flow of non-turbulent wind year round, with a minimum probability of abrupt potent bursts of wind. Additionally, you would not get a turbine P.Eolico A Capelada A.I.E. like P.Eolico A Capelada A.I.E. involved if A Capelada II was not built near local demand or transmission capaCarino,Cedeira,Ortigueira.
Before construction, A Capelada II was almost certainly screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not sufficient for exact siting of a large wind power project.
Site information around Carino,Cedeira,Ortigueira would have been a major element in the development conclusion Winds around Carino,Cedeira,Ortigueira are analysed for at least a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
The wind hits sooner at higher altitudes due to the reduced influence of drag. The rise in velocity with altitude is most extraordinary close to the surface and is affected by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity increases with altitude and is also more pronounced near land and is altered by geography, surface and limitations.
Wind speeds growing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, raises the predicted wind speeds by 10%, and the anticipated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But this may not be the way it is in hilly areas.
Individual turbines at A Capelada II are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric energy is elevated in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each turbine site.
Facts about A Capelada II wind farm
- Name: A Capelada II
- Wind turbine Supplier: Made Tecnolgías, Model: AE32, Units: 45,
- Country: Spain
- Developer: P.Eolico A Capelada A.I.E.
- State: Coruña
- City: Carino,Cedeira,Ortigueira
- Owner: P.Eolico A Capelada A.I.E.