Corbu 1 and 2 wind farm is located in South-East, Romania. It was in fact brought online in 2010 and is owned by .
It is near Corbu, Constanta County.
See below for data.
As a general rule, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or bigger.
The very best destination for something similar to Corbu 1 and 2 is a steady availability of non-turbulent wind. An essential aspect of turbine siting is moreover admission to local demand or transmission capaCorbu, Constanta County.
During the planning stages the Corbu 1 and 2 wind farm would’ve been checked and authenticated through wind measurements. However, Corbu 1 and 2 wind farm would have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction might have been important to determining site potential to be able to finance the project. Winds around Corbu, Constanta County are analysed for at least a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like Corbu 1 and 2. This is due to drag The surge in velocity with altitude is most dramatic at the surface and is affected by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and it is more pronounced near land and is altered by landscape, surface and obstructions.
Wind speeds escalating with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, raises the anticipated wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing increases placement, specially in hilly areas.
Individual turbines at Corbu 1 and 2 are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric energy is improved in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Corbu 1 and 2 wind farm
- Name: Corbu 1 and 2
- Wind turbine Supplier: General Electric, Model: 1.5MW, Units: 10,
- Country: Romania
- Developer: Monsson Group
- State: South-East
- City: Corbu, Constanta County