Alto Minho I – Sto António wind farm is situated in Viana do Castelo, Portugal. It was in fact brought online in 2008 and is owned by .
It is near .
See below for data.
In most cases, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or larger.
The very best location for something such as Alto Minho I – Sto António would be a steady availability of non-turbulent wind. Additionally, you would not get a turbine like involved if Alto Minho I – Sto António was not built near local demand or transmission capa.
Before construction, Alto Minho I – Sto António was almost certainly screened on the basis of a wind atlas, and validated with wind specifications. However, Alto Minho I – Sto António wind farm might have needed more than simply meteorological data and measurements.
Assortment of site-specific data for wind speed and direction might have been essential to determining site potential to be able to fund the project. Local winds are frequently checked for a year or more, and detailed wind maps made before wind generators are set up.
The wind hits sooner at greater altitudes as a result of reduced effect of drag. The rise in velocity with altitude is most spectacular close to the surface and is affected by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and is more distinct near land and is changed by landscape, surface and obstacles.
Wind speeds escalating with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the height of a turbine, then, boosts the expected wind speeds by 10%, and the predicted power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But this isn’t necessarily the case in hilly areas.
Alto Minho I – Sto António turbines are linked via medium voltage lines and communications.
At a substation, this particular medium-voltage electric current is improved in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and probably access roads to every turbine site.
Facts about Alto Minho I – Sto António wind farm
- Name: Alto Minho I – Sto António
- Wind turbine Supplier: Enercon, Model: E70/2000, Units: 16,
- Country: Portugal
- Developer: Endesa, Domingos da Silva Teixeira, EDF Energy
- State: Viana do Castelo