Alto da Coutada II (Falperra-Rechazinha) wind farm is located in Vila Real, Portugal. It was finished in and is owned by Onshore.
It is near Falperra.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
The best position for a project like Alto da Coutada II (Falperra-Rechazinha) might have a near constant flow of non-turbulent wind all year long, having a minimum probability of sudden powerful bursts of wind. An important factor of turbine siting is moreover admission to local demand or transmission capaFalperra.
During the planning stages the Alto da Coutada II (Falperra-Rechazinha) wind farm would’ve been checked and validated through wind measurements. However, Alto da Coutada II (Falperra-Rechazinha) wind farm would have needed more than just meteorological data and measurements.
Site info around Falperra would have been a major element in the development conclusion Winds around Falperra are evaluated for over a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playin a project like Alto da Coutada II (Falperra-Rechazinha). This is due to drag The boost in velocity with altitude is most remarkable close to the surface and is affected by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and it is more distinct near land and is changed by landscape, surface and hurdles.
Wind speeds raising with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the height of a turbine, then, raises the predicted wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so that they don’t affect one another. However this is not always the situation in hilly areas.
Alto da Coutada II (Falperra-Rechazinha) turbines are related via medium voltage lines and communications.
At a substation, it medium-voltage electric current is increased in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and perhaps roads to every turbine site.