Alto Arganil wind project was installed in Coimbra, Portugal It was in fact brought online in 2009 and is owned by .
It is near bordering Castelo Branco and Coimbra districts.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or higher.
The best location for a project like Alto Arganil might have a near constant flow of non-turbulent wind throughout the year, with a minimum probability of abrupt potent bursts of wind. Additionally, you would not get a turbine like associated if Alto Arganil was not built near local demand or transmission capabordering Castelo Branco and Coimbra districts.
During the planning stages the Alto Arganil wind farm would have been checked and endorsed through wind measurements. However, Alto Arganil wind farm would have needed more than merely meteorological data and measurements.
Site info around bordering Castelo Branco and Coimbra districts is a major factor in the development conclusion Local winds are often checked for a year or more, and comprehensive wind maps created before wind generators are installed.
Altitude would also have a part to playwithin a project like Alto Arganil. This is because of drag The boost in velocity with altitude is most spectacular close to the surface and is impacted by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity rises with altitude and is also more evident near land and is altered by topography, surface and hurdles.
Sometimes, the increase of wind speeds with raising elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, enhances the predicted wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect each other. However this is not always the case in hilly areas.
Individual turbines at Alto Arganil are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is enhanced in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to each and every turbine site.
Facts about Alto Arganil wind farm
- Name: Alto Arganil
- Wind turbine Supplier: Enercon, Model: E82/2MW, Units: 18,
- Country: Portugal
- Developer: Enernova
- State: Coimbra
- City: bordering Castelo Branco and Coimbra districts