Zgorzelec wind farm is located in Lower Silesia (Dolnośląskie), Poland. It was completed in 2013 and is owned by EDP Renovaveis.
It is near Zgorzelec and Sulikowo District.
See below for data.
In most cases, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or greater.
The best position for a project like Zgorzelec would have a near constant flow of non-turbulent wind throughout the year, with a minimum probability of sudden powerful bursts of wind. Additionally, you would not get a turbine EDP Renovaveis like EDP Renovaveis included if Zgorzelec was not built near local demand or transmission capaZgorzelec and Sulikowo District.
During the planning stages the Zgorzelec wind farm would have been checked and authenticated through wind measurements. However, Zgorzelec wind farm might have needed more than merely meteorological data and measurements.
Site info around Zgorzelec and Sulikowo District is a major aspect in the ‘development’ decision Local winds are frequently supervised for a year or more, and comprehensive wind maps made before wind generators are installed.
Altitude would also have a part to playwithin a project like Zgorzelec. This is due to drag The rise in velocity with altitude is most extraordinary at the surface and is affected by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and is more distinct near land and is transformed by landscape, surface and obstacles.
Ordinarily, the rise of wind speeds with raising height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, raises the expected wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect one another. But this might not be the situation in hilly areas.
Individual turbines at Zgorzelec are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is elevated in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each and every turbine site.