Czarnozyly wind project was installed in Łódź (Łódzkie), Poland It was completed in 2012 and is owned by .
It is near Wielun.
See below for data.
As a rule, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or bigger.
The very best location for something such as Czarnozyly would be a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine like involved if Czarnozyly was not built near local demand or transmission capaWielun.
Before development, Czarnozyly was most likely screened on the basis of a wind atlas, and validated with wind measurements. However, Czarnozyly wind farm would have needed more than simply meteorological data and measurements.
Assortment of site-specific data for wind speed and direction could have been essential to determining site potential as a way to finance the project. Winds around Wielun are evaluated for over a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like Czarnozyly. This is because of drag The rise in velocity with altitude is most dramatic at the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and is more obvious near land and is altered by landscape, surface and obstacles.
Wind speeds growing with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, boosts the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. However this isn’t necessarily the way it is in hilly areas.
Individual turbines at Czarnozyly are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is improved in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and perhaps access roads to each and every turbine site.