Boryszewo wind project was installed in Pomerania (Pomorskie), Poland It was brought online in 2013 and is owned by .
It is near Boryszewo.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
The best location for something like Boryszewo would be a steady availability of non-turbulent wind. An essential aspect of turbine siting is moreover access to local requirement or transmission capaBoryszewo.
During the planning stages the Boryszewo wind farm would have been checked and confirmed through wind measurements. Meteorological wind data alone is usually not ample for precise siting of a large wind power project.
Site info around Boryszewo would have been a major element in the ‘development’ final decision Local winds are frequently examined for a year or more, and detailed wind maps constructed before wind generators are set up.
Altitude would also possess a part to performwithin a project like Boryszewo. This is due to drag The boost in velocity with altitude is most extraordinary close to the surface and is impacted by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity increases with altitude and is also more evident near land and is transformed by landscape, surface and hurdles.
Sometimes, the increase of wind speeds with growing elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, enhances the expected wind speeds by 10%, and the predicted power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. However this isn’t necessarily the case in hilly areas.
Boryszewo turbines are connected via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is improved in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each turbine site.
Facts about Boryszewo wind farm
- Name: Boryszewo
- Wind turbine Supplier: Vestas Wind Systems, Model: V47/660, Units: 4,
- Country: Poland
- Developer: Invenergy
- State: Pomerania (Pomorskie)
- City: Boryszewo