Cupisnique wind farm is located in La Libertad, Peru. It was finished in 2014 and is owned by ContourGlobal.
It is near Cupisnique.
See below for data.
In most cases, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or higher.
The very best destination for something similar to Cupisnique is a steady availability of non-turbulent wind. An essential aspect of turbine siting is also admission to local demand or transmission capaCupisnique.
During the planning stages the Cupisnique wind farm would have been checked and confirmed through wind measurements. However, Cupisnique wind farm might have needed more than just meteorological data and measurements.
Collection of site-specific data for wind speed and direction could have been imperative to determining site potential in order to fund the project. Local winds are often monitored for a year or more, and detailed wind maps built before wind generators are set up.
Altitude would also possess a part to performwithin a project like Cupisnique. This is because of drag The rise in velocity with altitude is most spectacular near the surface and is affected by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and it is more pronounced near land and is changed by geography, surface and obstacles.
Typically, the increase of wind speeds with increasing height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, enhances the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect one another. But micrositing maximizes placement, particularly in hilly areas.
Individual turbines at Cupisnique are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each turbine site.
Facts about Cupisnique wind farm
- Name: Cupisnique
- Wind turbine Supplier: Senvion, Model: MM82 2MW, Units: 8,
- Country: Peru
- Developer: Iberoperuana Inversiones, ContourGlobal
- State: La Libertad
- City: Cupisnique
- Owner: ContourGlobal