Linowo wind project was set up in Kuyavian-Pomerania (Kujawsko-Pomorskie), Poland It was brought online in 2013 and is owned by EDF Energies Nouvelles.
It is near Grudziadz region.
See below for data.
As a general rule, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or higher.
A great place for a project like Linowo would have a near constant flow of non-turbulent wind throughout the year, having a minimum chances of sudden effective bursts of wind. Additionally, you wouldn’t get a turbine EDF Energies Nouvelles like EDF Energies Nouvelles associated if Linowo was not built near local demand or transmission capaGrudziadz region.
Before building, Linowo was almost certainly screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not enough for accurate siting of a large wind power project.
Collection of site-specific data for wind speed and direction might have been imperative to determining site potential in order to fund the project. Local winds are often examined for a year or more, and detailed wind maps created before wind generators are set up.
Altitude would also possess a part to playwithin a project like Linowo. This is because of drag The rise in velocity with altitude is most spectacular near the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and is also more obvious near land and is changed by landscape, surface and limitations.
Sometimes, the increase of wind speeds with escalating elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, enhances the expected wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they don’t affect one another. But micrositing increases placement, specially in hilly areas.
Linowo turbines are related via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric energy is improved in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps roads to every turbine site.
Facts about Linowo wind farm
- Name: Linowo
- Wind turbine Supplier: Senvion, Model: MM92/2MW, Units: 4,
- Country: Poland
- State: Kuyavian-Pomerania (Kujawsko-Pomorskie)
- City: Grudziadz region
- Owner: EDF Energies Nouvelles