Bii Nee Stipa II (aka: “Stipa Nayaa”) wind farm is situated in Oaxaca, Mexico. It was in fact brought online in 2012 and is owned by Enel Green Power, Simest.
It is near Juchitán de Zaragoza.
See below for data.
Typically, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or bigger.
A great destination for a project like Bii Nee Stipa II (aka: “Stipa Nayaa”) could have a near constant flow of non-turbulent wind throughout the year, having a minimum chances of sudden powerful bursts of wind. An essential aspect of turbine siting is furthermore admittance to local requirement or transmission capaJuchitán de Zaragoza.
During the planning stages the Bii Nee Stipa II (aka: “Stipa Nayaa”) wind farm would’ve been checked and validated through wind measurements. Meteorological wind data alone is usually not adequate for accurate siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been vital to determining site potential as a way to fund the project. Winds around Juchitán de Zaragoza are analysed for at least a year or so plus the creation of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to performin a project like Bii Nee Stipa II (aka: “Stipa Nayaa”). This is due to drag The surge in velocity with altitude is most remarkable at the surface and is impacted by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and it is more pronounced near land and is altered by topography, surface and obstructions.
Typically, the increase of wind speeds with escalating height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, boosts the anticipated wind speeds by 10%, and the predicted power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing optimizes placement, particularly in hilly areas.
Bii Nee Stipa II (aka: “Stipa Nayaa”) turbines are linked via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is improved in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and probably roads to each and every turbine site.