Burer Bierg wind project was set up in Grevenmacher, Luxembourg It was in fact brought online in 2008 and is owned by Enovos, Société Electrique de l’Our, Wickler Frères, Agence de l’Energie.
It is near Mompach.
See below for data.
For the most part, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or larger.
The best place for a project like Burer Bierg could have a near constant flow of non-turbulent wind year round, having a minimum probability of sudden potent bursts of wind. An important factor of turbine siting is furthermore admission to local demand or transmission capaMompach.
During the planning stages the Burer Bierg wind farm would’ve been checked and validated through wind measurements. Meteorological wind data alone is usually not enough for accurate siting of a large wind power project.
Site data around Mompach would have been a major element in the development choice Winds around Mompach are evaluated for at least a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playwithin a project like Burer Bierg. This is because of drag The rise in velocity with altitude is most extraordinary at the surface and is affected by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and it is more obvious near land and is altered by topography, surface and hurdles.
Generally, the rise of wind speeds with growing height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, increases the predicted wind speeds by 10%, and the predicted power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing optimizes placement, specifically in hilly areas.
Burer Bierg turbines are linked via medium voltage lines and communications.
At a substation, this particular medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Burer Bierg wind farm
- Name: Burer Bierg
- Wind turbine Supplier: Vestas Wind Systems, Model: V47/660, Units: 1,
- Country: Luxembourg
- Developer: Enovos
- State: Grevenmacher
- City: Mompach
- Owner: Enovos, Société Electrique de l’Our, Wickler Frères, Agence de l’Energie