Pilsumi wind project was installed in Vidzeme, Latvia It was brought online in 2010 and is owned by Pilsums.
It is near Braslavas pagasts.
See below for data.
For the most part, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or bigger.
The best location for something such as Pilsumi would be a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine Pilsums like Pilsums associated if Pilsumi was not built near local demand or transmission capaBraslavas pagasts.
Before development, Pilsumi was almost certainly screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not sufficient for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction could have been vital to determining site potential in order to finance the project. Local winds are often checked for a year or more, and detailed wind maps constructed before wind generators are installed.
Altitude would also possess a part to performin a project like Pilsumi. This is due to drag The rise in velocity with altitude is most extraordinary at the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is also more obvious near land and is transformed by terrain, surface and obstructions.
Normally, the increase of wind speeds with raising height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, boosts the anticipated wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they don’t affect one another. However this may not be the case in hilly areas.
Pilsumi turbines are related via medium voltage lines and communications.
At a substation, that medium-voltage electric current is increased in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each turbine site.
Facts about Pilsumi wind farm
- Name: Pilsumi
- Wind turbine Supplier: Vestas Wind Systems, Model: V90/ 2MW, Units: 10,
- Country: Latvia
- Developer: Pilsums
- State: Vidzeme
- City: Braslavas pagasts
- Owner: Pilsums