Chiba wind farm is situated in Chiba, Japan. It was in fact brought online in 2006 and is owned by .
It is near Chiba City.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or more.
The best place for a project like Chiba might have a near constant flow of non-turbulent wind all year round, having a minimum chance of sudden effective bursts of wind. Additionally, you would not get a turbine like included if Chiba was not built near local demand or transmission capaChiba City.
Before development, Chiba was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. However, Chiba wind farm might have needed more than simply meteorological data and measurements.
Assortment of site-specific data for wind speed and direction would have been imperative to determining site potential as a way to fund the project. Winds around Chiba City are examined for over a year or so alongside the development of detailed maps. Only then are wind turbines installed.
The wind blows more rapidly at higher altitudes because of the reduced effect of drag. The boost in velocity with altitude is most dramatic at the surface and is impacted by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity increases with altitude and is more evident near land and is transformed by terrain, surface and obstacles.
Wind speeds growing with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, raises the predicted wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect each other. But this isn’t necessarily the case in hilly areas.
Chiba turbines are linked via medium voltage lines and communications.
At a substation, it medium-voltage electric current is increased in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and perhaps roads to each turbine site.
Facts about Chiba wind farm
- Name: Chiba
- Wind turbine Supplier: Pioneer Wincon, Model: 0.85MW, Units: 1,
- Country: Japan
- Developer: Chiba City Hall
- State: Chiba
- City: Chiba City