Awaji (Kansai Electric) wind farm is located in Hyōgo, Japan. It was in fact brought online in 2012 and is owned by Kansai Electric Power Co.,Inc..
It is near Awaji.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
An ideal position for a project like Awaji (Kansai Electric) might have a near constant flow of non-turbulent wind throughout the year, with a minimum chances of sudden effective bursts of wind. Additionally, you would not get a turbine Kansai Electric Power Co.,Inc. like Kansai Electric Power Co.,Inc. associated if Awaji (Kansai Electric) was not built near local demand or transmission capaAwaji.
During the planning stages the Awaji (Kansai Electric) wind farm would have been checked and authenticated through wind measurements. However, Awaji (Kansai Electric) wind farm might have needed more than simply meteorological data and measurements.
Assortment of site-specific data for wind speed and direction would have been imperative to determining site potential as a way to fund the project. Local winds are often checked for a year or more, and comprehensive wind maps constructed before wind generators are set up.
Altitude would also have a part to playin a project like Awaji (Kansai Electric). This is due to drag The increase in velocity with altitude is most remarkable close to the surface and is impacted by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and is also more distinct near land and is transformed by geography, surface and obstructions.
Wind speeds increasing with altitude is part of a wind energy law. This Hyōgos wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, boosts the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they don’t affect one another. However this may not be the case in hilly areas.
Individual turbines at Awaji (Kansai Electric) are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is improved in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and probably roads to every turbine site.
Facts about Awaji (Kansai Electric) wind farm
- Name: Awaji (Kansai Electric)
- Wind turbine Supplier: Senvion, Model: MM92 2.05MW, Units: 4,
- Country: Japan
- State: Hyōgo
- City: Awaji
- Owner: Kansai Electric Power Co.,Inc.