Aridagawa Wind Farm wind project was set up in Wakayama, Japan It was completed in 2009 and is owned by .
It is near Arida City.
See below for data.
As a general rule, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or greater.
A great place for a project like Aridagawa Wind Farm could have a near constant flow of non-turbulent wind all year round, with a minimum likelihood of sudden powerful bursts of wind. Additionally, you would not get a turbine like included if Aridagawa Wind Farm was not built near local demand or transmission capaArida City.
Before development, Aridagawa Wind Farm was probably screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not ample for accurate siting of a large wind power project.
Site information around Arida City would have been a major element in the ‘development’ final decision Winds around Arida City are analysed for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playwithin a project like Aridagawa Wind Farm. This is because of drag The rise in velocity with altitude is most remarkable near the surface and is impacted by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity boosts with altitude and it is more obvious near land and is changed by landscape, surface and obstacles.
Wind speeds raising with altitude is part of a wind energy law. This Wakayamas wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, raises the predicted wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they don’t affect one another. But micrositing increases placement, specifically in hilly areas.
Aridagawa Wind Farm turbines are linked via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is elevated in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably access roads to every turbine site.
Facts about Aridagawa Wind Farm wind farm
- Name: Aridagawa Wind Farm
- Wind turbine Supplier: Siemens, Model: 1.300MW, Units: 10,
- Country: Japan
- Developer: Eurus Energy Aridagawa Wind Farm
- State: Wakayama
- City: Arida City