Corleto Perticara project wind farm is situated in Basilicata, Italy. It was finished in 2011 and is owned by .
It is near Corleto Perticara.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or more.
A perfect place for a project like Corleto Perticara project could have a near constant flow of non-turbulent wind all year long, with a minimum chance of sudden powerful bursts of wind. An important factor of turbine siting is moreover admittance to local demand or transmission capaCorleto Perticara.
During the planning stages the Corleto Perticara project wind farm would have been checked and validated through wind measurements. Meteorological wind data alone is usually not ample for exact siting of a large wind power project.
Site information around Corleto Perticara is a major factor in the ‘development’ conclusion Local winds are frequently checked for a year or more, and detailed wind maps created before wind generators are set up.
Altitude would also possess a part to playin a project like Corleto Perticara project. This is due to drag The rise in velocity with altitude is most spectacular near the surface and is affected by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is also more obvious near land and is transformed by topography, surface and obstacles.
Wind speeds escalating with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, enhances the anticipated wind speeds by 10%, and the expected power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. However this may not be the way it is in hilly areas.
Individual turbines at Corleto Perticara project are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric energy is enhanced in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Corleto Perticara project wind farm
- Name: Corleto Perticara project
- Wind turbine Supplier: Gamesa, Model: G80-2.0MW, Units: 5,
- Country: Italy
- Developer: Marcopolo Engineering Spa
- State: Basilicata
- City: Corleto Perticara