Copertino wind farm is situated in Apulia, Italy. It was created in 2011 and is owned by .
It is near Copertino.
See below for data.
For the most part, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or larger.
The best location for something such as Copertino would be a steady availability of non-turbulent wind. Additionally, you would not get a turbine like involved if Copertino was not built near local demand or transmission capaCopertino.
Before construction, Copertino was probably screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not enough for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction could have been important to determining site potential to be able to fund the project. Local winds are frequently supervised for a year or more, and comprehensive wind maps created before wind generators are installed.
Altitude would also possess a part to playin a project like Copertino. This is due to drag The boost in velocity with altitude is most spectacular close to the surface and is impacted by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and it is more evident near land and is changed by geography, surface and obstacles.
Ordinarily, the increase of wind speeds with increasing elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, raises the anticipated wind speeds by 10%, and the expected power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But this isn’t necessarily the way it is in hilly areas.
Individual turbines at Copertino are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to each turbine site.
Facts about Copertino wind farm
- Name: Copertino
- Wind turbine Supplier: Vestas Wind Systems, Model: V52/850, Units: 10,
- Country: Italy
- Developer: Kimera
- State: Apulia
- City: Copertino