Colle Santa Maria wind project was set up in Lazio, Italy It was finished in 2007 and is owned by .
It is near Catanzaro.
See below for data.
As a general rule, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or higher.
The best place for a project like Colle Santa Maria could have a near constant flow of non-turbulent wind all year long, having a minimum likelihood of sudden powerful bursts of wind. An essential aspect of turbine siting is also admission to local requirement or transmission capaCatanzaro.
During the planning stages the Colle Santa Maria wind farm would have been checked and confirmed through wind measurements. However, Colle Santa Maria wind farm might have needed more than simply meteorological data and measurements.
Site data around Catanzaro would have been a major aspect in the development final decision Local winds are often supervised for a year or more, and detailed wind maps constructed before wind generators are installed.
Altitude would also possess a part to performin a project like Colle Santa Maria. This is because of drag The boost in velocity with altitude is most dramatic near the surface and is affected by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and it is more distinct near land and is changed by terrain, surface and limitations.
Wind speeds growing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, increases the expected wind speeds by 10%, and the expected power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing increases placement, particularly in hilly areas.
Individual turbines at Colle Santa Maria are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and probably roads to each and every turbine site.
Facts about Colle Santa Maria wind farm
- Name: Colle Santa Maria
- Wind turbine Supplier: General Electric, Model: GE-2.5, Units: 20,
- Country: Italy
- Developer: Vestas Wind Systems
- State: Lazio
- City: Catanzaro