Cerignola wind farm is situated in Apulia, Italy. It was completed in 2011 and is owned by .
It is near Cerignola.
See below for data.
Typically, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or bigger.
An ideal position for a project like Cerignola could have a near constant flow of non-turbulent wind throughout the year, having a minimum chances of sudden powerful bursts of wind. An important factor of turbine siting is moreover access to local requirement or transmission capaCerignola.
Before development, Cerignola was probably screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not adequate for accurate siting of a large wind power project.
Site information around Cerignola is a major aspect in the development decision Local winds are often monitored for a year or more, and detailed wind maps built before wind generators are set up.
Altitude would also have a part to playin a project like Cerignola. This is because of drag The surge in velocity with altitude is most extraordinary at the surface and is impacted by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity grows with altitude and is also more pronounced near land and is changed by landscape, surface and obstructions.
Wind speeds escalating with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, enhances the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect one another. But this might not be the situation in hilly areas.
Individual turbines at Cerignola are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is enhanced in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly roads to each and every turbine site.
Facts about Cerignola wind farm
- Name: Cerignola
- Wind turbine Supplier: General Electric, Model: GE1.5sle, Units: 10,
- Country: Italy
- Developer: Fortore Agroenergie
- State: Apulia
- City: Cerignola