Castelnuovo di Conza 2 wind farm is situated in Campania, Italy. It was completed in 2003 and is owned by Edison SpA.
It is near Salerno,Castelnuovo di Conza.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or more.
The best position for a project like Castelnuovo di Conza 2 would have a near constant flow of non-turbulent wind throughout the year, with a minimum chances of sudden powerful bursts of wind. Additionally, you wouldn’t get a turbine Edison SpA like Edison SpA associated if Castelnuovo di Conza 2 was not built near local demand or transmission capaSalerno,Castelnuovo di Conza.
During the planning stages the Castelnuovo di Conza 2 wind farm would have been checked and authenticated through wind measurements. Meteorological wind data alone is usually not adequate for correct siting of a large wind power project.
Site data around Salerno,Castelnuovo di Conza is a major factor in the ‘development’ decision Winds around Salerno,Castelnuovo di Conza are evaluated for at least a year or so plus the development of detailed maps. Only then are wind turbines installed.
The wind blows quicker at higher altitudes due to the reduced influence of drag. The boost in velocity with altitude is most spectacular at the surface and is affected by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and it is more evident near land and is altered by landscape, surface and obstructions.
Wind speeds increasing with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, increases the predicted wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect one another. But micrositing optimizes placement, specially in hilly areas.
Individual turbines at Castelnuovo di Conza 2 are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is increased in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and probably roads to every turbine site.
Facts about Castelnuovo di Conza 2 wind farm
- Name: Castelnuovo di Conza 2
- Wind turbine Supplier: Enercon, Model: E48/800 KW, Units: 15,
- Country: Italy
- Developer: Edison SpA
- State: Campania
- City: Salerno,Castelnuovo di Conza
- Owner: Edison SpA