Castelnuovo di Conza 1 wind farm is situated in Campania, Italy. It was completed in 2000 and is owned by Edison SpA.
It is near Salerno,Castelnuovo di Conza.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
A perfect location for a project like Castelnuovo di Conza 1 would have a near constant flow of non-turbulent wind throughout the year, having a minimum chance of sudden effective bursts of wind. Additionally, you would not get a turbine Edison SpA like Edison SpA involved if Castelnuovo di Conza 1 was not built near local demand or transmission capaSalerno,Castelnuovo di Conza.
Before building, Castelnuovo di Conza 1 was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not ample for precise siting of a large wind power project.
Collection of site-specific data for wind speed and direction might have been essential to determining site potential as a way to fund the project. Winds around Salerno,Castelnuovo di Conza are examined for at least a year or so alongside the development of detailed maps. Only then are wind turbines installed.
The wind blows more quickly at higher altitudes because of the reduced influence of drag. The surge in velocity with altitude is most extraordinary at the surface and is affected by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity boosts with altitude and is also more distinct near land and is transformed by landscape, surface and obstructions.
Normally, the increase of wind speeds with escalating height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, boosts the expected wind speeds by 10%, and the expected power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing optimizes placement, specially in hilly areas.
Castelnuovo di Conza 1 turbines are linked via medium voltage lines and communications.
At a substation, it medium-voltage electric energy is improved in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and probably roads to every turbine site.
Facts about Castelnuovo di Conza 1 wind farm
- Name: Castelnuovo di Conza 1
- Wind turbine Supplier: Gamesa, Model: 850KW, Units: 1,
- Country: Italy
- Developer: Edison SpA
- State: Campania
- City: Salerno,Castelnuovo di Conza
- Owner: Edison SpA