Casone Romano wind farm is located in Apulia, Italy. It was completed in 1994 and is owned by Edison SpA.
It is near Foggia, Casone Romano.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best place for a project like Casone Romano would have a near constant flow of non-turbulent wind all year long, with a minimum chances of sudden effective bursts of wind. Additionally, you would not get a turbine Edison SpA like Edison SpA included if Casone Romano was not built near local demand or transmission capaFoggia, Casone Romano.
Before development, Casone Romano was most likely screened on the basis of a wind atlas, and validated with wind specifications. However, Casone Romano wind farm would have needed more than simply meteorological data and measurements.
Site information around Foggia, Casone Romano is a major element in the development final decision Winds around Foggia, Casone Romano are evaluated for at least a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
The wind hits quicker at higher altitudes as a result of reduced influence of drag. The rise in velocity with altitude is most spectacular near the surface and is affected by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and is more distinct near land and is transformed by landscape, surface and obstacles.
Almost always, the growth of wind speeds with escalating height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, enhances the expected wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect each other. However this is not always the case in hilly areas.
Individual turbines at Casone Romano are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is improved in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and probably access roads to every turbine site.
Facts about Casone Romano wind farm
- Name: Casone Romano
- Wind turbine Supplier: Clipper Windpower, Model: 2.5MW, Units: 2,
- Country: Italy
- Developer: Edison SpA
- State: Apulia
- City: Foggia, Casone Romano
- Owner: Edison SpA