Caraffa in Catanzaro wind project was installed in Calabria, Italy It was completed in 2009 and is owned by .
It is near Caraffa.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
The best location for something such as Caraffa in Catanzaro is a steady availability of non-turbulent wind. An important factor of turbine siting is also admission to local requirement or transmission capaCaraffa.
During the planning stages the Caraffa in Catanzaro wind farm would’ve been checked and endorsed through wind measurements. Meteorological wind data alone is usually not ample for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been imperative to determining site potential in order to finance the project. Winds around Caraffa are analysed for over a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playin a project like Caraffa in Catanzaro. This is because of drag The boost in velocity with altitude is most spectacular near the surface and is impacted by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and is more pronounced near land and is changed by terrain, surface and obstructions.
Normally, the increase of wind speeds with escalating height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, increases the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing maximizes placement, specially in hilly areas.
Individual turbines at Caraffa in Catanzaro are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is improved in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and probably access roads to every turbine site.
Facts about Caraffa in Catanzaro wind farm
- Name: Caraffa in Catanzaro
- Wind turbine Supplier: Mitsubishi Corporation, Model: MWT1000-61, Units: 60,
- Country: Italy
- Developer: IVPC
- State: Calabria
- City: Caraffa