Bovino wind project was set up in Foggia, Italy It was brought online in 2012 and is owned by .
It is near Bovino.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
A great position for a project like Bovino might have a near constant flow of non-turbulent wind year round, having a minimum probability of abrupt powerful bursts of wind. An important factor of turbine siting is also access to local requirement or transmission capaBovino.
Before development, Bovino was most likely screened on the basis of a wind atlas, and validated with wind measurements. However, Bovino wind farm might have needed more than merely meteorological data and measurements.
Site info around Bovino is a major factor in the ‘development’ choice Winds around Bovino are examined for over a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
The wind blows speedier at greater altitudes because of the reduced effect of drag. The boost in velocity with altitude is most spectacular near the surface and is affected by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity grows with altitude and is more distinct near land and is altered by landscape, surface and limitations.
Normally, the rise of wind speeds with increasing elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, increases the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect each other. However this is not always the case in hilly areas.
Individual turbines at Bovino are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is enhanced in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each turbine site.
Facts about Bovino wind farm
- Name: Bovino
- Wind turbine Supplier: Vestas Wind Systems, Model: V100/1800, Units: 2,
- Country: Italy
- Developer: Paul Srl
- State: Foggia
- City: Bovino