Alberona 1 wind farm is situated in Apulia, Italy. It was finished in 1996 and is owned by IVPC.
It is near Foggia, Alberona.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
The very best destination for something like Alberona 1 would be a steady supply of non-turbulent wind. An essential aspect of turbine siting is also admission to local requirement or transmission capaFoggia, Alberona.
Before development, Alberona 1 was probably screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not sufficient for accurate siting of a large wind power project.
Assortment of site-specific data for wind speed and direction could have been imperative to determining site potential in order to fund the project. Winds around Foggia, Alberona are evaluated for over a year or so plus the development of detailed maps. Only then are wind turbines installed.
The wind hits swifter at higher altitudes as a result of reduced influence of drag. The surge in velocity with altitude is most dramatic close to the surface and is impacted by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and it is more pronounced near land and is transformed by landscape, surface and obstructions.
Typically, the increase of wind speeds with growing elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, raises the predicted wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out to make sure they don’t affect each other. However this might not be the case in hilly areas.
Individual turbines at Alberona 1 are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and probably roads to each turbine site.
Facts about Alberona 1 wind farm
- Name: Alberona 1
- Wind turbine Supplier: Vestas Wind Systems, Model: V42 -600kW, Units: 5,
- Country: Italy
- Developer: IVPC
- State: Apulia
- City: Foggia, Alberona
- Owner: IVPC