Albanella wind project was installed in Campania, Italy It was in fact brought online in 2003 and is owned by Alerion Clean Power.
It is near Albanella.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
An ideal position for a project like Albanella might have a near constant flow of non-turbulent wind year round, with a minimum chance of abrupt powerful bursts of wind. An important factor of turbine siting is moreover access to local demand or transmission capaAlbanella.
Before development, Albanella was most likely screened on the foundation of a wind atlas, and validated with wind measurements. However, Albanella wind farm might have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction could have been crucial to determining site potential to be able to finance the project. Winds around Albanella are analysed for at least a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
The wind blows quicker at higher altitudes because of the reduced influence of drag. The rise in velocity with altitude is most dramatic at the surface and is affected by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and is more obvious near land and is changed by terrain, surface and limitations.
Commonly, the rise of wind speeds with escalating height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, raises the expected wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect each other. But micrositing optimizes placement, specifically in hilly areas.
Individual turbines at Albanella are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is increased in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Albanella wind farm
- Name: Albanella
- Wind turbine Supplier: Vestas Wind Systems, Model: V52/850, Units: 10,
- Country: Italy
- Developer: Alerion Clean Power
- State: Campania
- City: Albanella
- Owner: Alerion Clean Power