Drumlough Hill wind project was set up in Donegal, Ireland It was completed in 1997 and is owned by Energia Group.
It is near Buncrana.
See below for data.
In most cases, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or larger.
The very best destination for something similar to Drumlough Hill is a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine Energia Group like Energia Group included if Drumlough Hill was not built near local demand or transmission capaBuncrana.
Before development, Drumlough Hill was probably screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for exact siting of a large wind power project.
Collection of site-specific data for wind speed and direction might have been crucial to determining site potential as a way to finance the project. Local winds are frequently watched for a year or more, and detailed wind maps constructed before wind generators are installed.
Altitude would also have a part to performin a project like Drumlough Hill. This is because of drag The surge in velocity with altitude is most extraordinary near the surface and is affected by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is more evident near land and is transformed by landscape, surface and hurdles.
Commonly, the rise of wind speeds with increasing elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, boosts the expected wind speeds by 10%, and the predicted power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing optimizes placement, particularly in hilly areas.
Individual turbines at Drumlough Hill are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps roads to each turbine site.