Bawnmore wind farm is situated in Cork, Ireland. It was in fact brought online in 2012 and is owned by Enerco Energy.
It is near .
See below for data.
As a rule, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or larger.
The best destination for a project like Bawnmore would have a near constant flow of non-turbulent wind all year round, with a minimum likelihood of sudden effective bursts of wind. An essential aspect of turbine siting is furthermore access to local requirement or transmission capa.
During the planning stages the Bawnmore wind farm would’ve been checked and validated through wind measurements. However, Bawnmore wind farm would have needed more than simply meteorological data and measurements.
Assortment of site-specific data for wind speed and direction could have been important to determining site potential as a way to fund the project. Local winds are frequently checked for a year or more, and comprehensive wind maps made before wind generators are set up.
The wind blows swifter at higher altitudes because of the reduced effect of drag. The rise in velocity with altitude is most spectacular close to the surface and is affected by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and is more evident near land and is changed by topography, surface and obstacles.
Typically, the growth of wind speeds with raising height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, enhances the anticipated wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect each other. However this is not always the case in hilly areas.
Individual turbines at Bawnmore are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is increased in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each and every turbine site.