Barnesmore wind project was set up in Donegal, Ireland It was brought online in 1997 and is owned by ScottishPower.
It is near .
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
A perfect position for a project like Barnesmore would have a near constant flow of non-turbulent wind all year long, having a minimum likelihood of sudden powerful bursts of wind. Additionally, you would not get a turbine ScottishPower like ScottishPower involved if Barnesmore was not built near local demand or transmission capa.
Before development, Barnesmore was most likely screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not sufficient for accurate siting of a large wind power project.
Site information around would have been a major element in the ‘development’ decision Winds around are analysed for over a year or so plus the creation of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to performwithin a project like Barnesmore. This is due to drag The surge in velocity with altitude is most dramatic at the surface and is impacted by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity grows with altitude and is also more distinct near land and is changed by terrain, surface and obstructions.
Commonly, the rise of wind speeds with escalating height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, raises the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect each other. However this is not always the case in hilly areas.
Individual turbines at Barnesmore are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric energy is increased in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and possibly roads to each turbine site.
Facts about Barnesmore wind farm
- Name: Barnesmore
- Wind turbine Supplier: Senvion, Model: 3.2M114, Units: 7,
- Country: Ireland
- Developer: ScottishPower
- State: Donegal
- Owner: ScottishPower