Edayarpalayam (Hindustan Textiles) 0.23MW wind project wind project was installed in Tamil Nadu, India It was completed in 2001 and is owned by Hindustan Textiles.
It is near Coimbatore.
See below for data.
Typically, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or larger.
An ideal location for a project like Edayarpalayam (Hindustan Textiles) 0.23MW wind project would have a near constant flow of non-turbulent wind all year long, having a minimum chance of abrupt powerful bursts of wind. Additionally, you wouldn’t get a turbine Hindustan Textiles like Hindustan Textiles involved if Edayarpalayam (Hindustan Textiles) 0.23MW wind project was not built near local demand or transmission capaCoimbatore.
During the planning stages the Edayarpalayam (Hindustan Textiles) 0.23MW wind project wind farm would’ve been checked and confirmed through wind measurements. Meteorological wind data alone is usually not enough for precise siting of a large wind power project.
Site info around Coimbatore is a major aspect in the ‘development’ choice Winds around Coimbatore are analysed for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
The wind hits swifter at greater altitudes because of the reduced effect of drag. The boost in velocity with altitude is most spectacular at the surface and is affected by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is also more pronounced near land and is changed by landscape, surface and obstacles.
Ordinarily, the growth of wind speeds with increasing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, enhances the anticipated wind speeds by 10%, and the predicted power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing optimizes placement, specifically in hilly areas.
Edayarpalayam (Hindustan Textiles) 0.23MW wind project turbines are linked via medium voltage lines and communications.
At a substation, this particular medium-voltage electric energy is enhanced in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to each turbine site.
Facts about Edayarpalayam (Hindustan Textiles) 0.23MW wind project wind farm
- Name: Edayarpalayam (Hindustan Textiles) 0.23MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: 0.35MW, Units: 2,
- Country: India
- Developer: Enercon India
- State: Tamil Nadu
- City: Coimbatore
- Owner: Hindustan Textiles